Avionics Technicians

Job Title: Aircraft Mechanic C - A&P Mechanic

Location: Tucson, AZ

Summary:

Duties include but are not limited to: scheduled/unscheduled aircraft maintenance on all aircraft systems; turbofan engine, airframe, flight control/landing gear rigging, troubleshooting systems, daily/turnaround inspections, perform corrosion inspections and related treatment, washing/cleaning, servicing aircraft fuel/oil/hydraulic/oxygen/nitrogen systems, Structural repairs and component in-house repair/back shop programs. The aircraft mechanic reports to the Shift Lead Aircraft Mechanic.

Additional Duties:

• Maintains EC37B aircraft in support of aircrew missions. • Launches and recovers aircraft, to include tie-down, cover, and plug removal/installation, and perform required inspections to ensure airframe structure and power plant serviceability. • Adjusts, aligns, and calibrates aircraft components. Performs functional checks of fuel, hydraulic, engines, avionics, and electro-environmental systems. • Advises supervision of deficiencies affecting aircraft airworthiness. • Performs scheduled and unscheduled inspections in accordance with Original Equipment Manufacturers (OEM) established procedures/specifications. • Prepares and maintains aircraft maintenance records and historical documents. • Monitors/reviews deficiency reports for adverse trends. • Uses applicable technical data/manuals when performing aircraft maintenance, and to troubleshoot aircraft/system discrepancies. • Performs in-progress and follow-up inspections during and upon completion of maintenance actions. Researches, orders and receives aircraft parts. • Prepares parts for turn-in back into the supply system. Initiates material deficiency reports as required. • Inventories aircraft support equipment. • Maintains hand and special tools in a safe and serviceable condition. • Responsible for site, customer and company tool accountability procedures to include reporting unserviceable tools and equipment to appropriate responsible party. • Annotates equipment/tools inspection and condition documents. • Performs serviceability checks prior to operating powered and non-powered support equipment. • Complies with established policies, procedures and standards. • Assists other mechanics/specialists as required. • Complies with all safety, environmental, security and housekeeping standards. • Complies with training requirements. • Assists in training newly assigned personnel as required. • Operates vehicles, both special purpose and regular as authorized. • Practices good housekeeping, tool control, FOD awareness/prevention and safety at all times. • Assists assigned personnel in researching and requisitioning aircraft parts and components and in determining the reparability and serviceability of these assets. • Monitors bench stock items and tool inventory inspections. • Actively participates in the Safety Program. • Refers to hazardous material training and ensure HAZMAT processes are followed. • Assists in aircraft movement flight line FOD prevention walks as required. • Completes maintenance documentation using required forms. • Services aircraft with fuel, oil, grease, hydraulic fluid, air, oxygen and nitrogen. • Performs aircraft corrosion control procedures to include wash, wipe down, polish and vacuum. • Discusses discrepancies with aircrews to secure adequate troubleshooting information and flight data. • Other related duties as required to support contract and mission requirements • Maintain strict compliance with all required Communications Security (COMSEC) policies and procedures.

Required Education and Experience:

Two (2) to six (6) years aircraft mechanic level experience to be considered.

Strongly prefer recent Gulfstream Global Jet, or business jet experience on civilian and military platforms including Rolls Royce turbofan experience.

• Current FAA A&P certificate required • Must be able to work shifts as assigned and travel as part of a maintenance recovery team if required. CONUS and OCONUS deployment is required. • Must be in good physical condition, and capable of completing/passing a required physical exam and CRC course prior to OCONUS deployment. • Must be able to work in the established work/living environment, work shift schedules as assigned 7 days a week, 12 hours a day to support mission requirements. • Experience in the use of common hand and special tools/testers as required for aircraft maintenance. • Must have in-depth working knowledge of aircraft safety directives. • Must have a high school diploma or equivalent. • Must be able to read, write, speak and understand English. • Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver's license. • Must be able to obtain and maintain an interim DOD secret government security clearance as a minimum prior to hire. • Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. • Must have an in-depth knowledge of using aircraft technical publications-read, interpret, follow and basic comprehension of schematic diagrams, drawings, and charts. • Must have a working knowledge (input and extract data) of maintenance database technology.

Physical Demands: This maintenance classification activity is usually accomplished in a flight line-like environment with extensive climbing, standing, stooping, bending, pushing, kneeling, stretching, and walking demands. May require lifting of objects whose weight normally will not exceed 50lbs. Special vision abilities required to perform this job are close and peripheral vision, and acceptable depth perception.

Work Environment: The diversity of working conditions range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject the individual to severe changes in temperature, wind, rain, etc. May be required to work in areas where high noise hazards, exposure to fumes, airborne particles, and electrical shock hazards exist.

Licensing, Certification Requirements:

FAA Airframe & Power plant Certificate

Formal or Specialized Training/Equivalent on assigned aircraft and equipment

US Citizenship

Valid State Drivers License

Valid US Passport

Position requires the ability to obtain and maintain a DoD security clearance which requires U.S. citizenship.

L3Harris Technologies is proud to be an Affirmative Action/Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Aircraft Maintenance C - Aircraft Maintenance (Avionics Technician)

Location: Tucson, AZ ( Must relocate to Arizona)

Summary: Performs aircraft avionics/electronics systems and components, Electro/Environmental, and associated component repair and maintenance. Conducts fault isolation, repairs, removal and replacement of components to resolve avionics or electrical discrepancies. Completes scheduled and unscheduled maintenance of avionics on EC37B aircraft. Supports maintenance and repair of Mission Support Equipment as necessary. The avionics technicians report to the Lead Avionics Technician.

ESSENTIAL DUTIES AND ACCOUNTABILITIES: • Responsible for testing, inspection, repair, and removal and replacement of avionic systems and components on the Gulfstream EC37B aircraft. • Repairs aircraft wiring/wiring harnesses. • Performs operational checkout of aircraft avionics systems during pre-flight and post-flight as necessary. • Responds to flight/maintenance crew reported discrepancies by troubleshooting and repairing any systems to make aircraft ready for flight for quick turn-around. • Assists in launch, recovery, servicing, and ground handling of aircraft. • Performs scheduled/unscheduled inspections as required in accordance with Original Equipment Manufacturers (OEM) procedures. • Prepares and maintains aircraft maintenance records and historical documents. • Accomplishes maintenance manpower and aircraft maintenance actions using the program maintenance database system. • Reviews and utilizes maintenance data collection reports. • Monitors/reviews deficiency reports for adverse trends. • Uses applicable technical orders/manuals when performing maintenance, and to troubleshoot aircraft/systems discrepancies. • Performs in-progress and follow-up inspections during and upon completion of maintenance actions. • Researches, orders and receives aircraft parts or components necessary to make repairs. • Prepares parts for turn-in back into the supply system. Initiates material deficiency reports as required. • Inventories aircraft support equipment. • Maintains tools, hand and special, in a safe and serviceable condition. • Responsible for site, customer, and company tool accountability procedures to include reporting unserviceable tools and equipment to the appropriate responsible party. • Annotates equipment/tools inspection and condition documents. • Performs serviceability checks prior to operating powered and non-powered support equipment. • Complies with established policies, procedures and standards. • Assists other mechanics/technicians as required. • Complies with all safety, environmental, security and housekeeping standards. • Complies with established training requirements. • Assists in training newly assigned personnel as required. • Operates vehicles, both special purpose and regular as authorized. • Practices good housekeeping, tool control, FOD awareness/prevention and safety at all times. • Maintains infrared detecting system, airborne video, laser system and night vision system. • Performs battery maintenance • May provide on-the-job training of new employees. • Assists assigned personnel in researching and requisitioning aircraft parts and components and in determining the reparability and serviceability of these assets. • Monitors bench stock items and tool inventory inspections. • Participates in work area safety and FOD prevention programs. • Actively participates in the Safety Program. • Refers to hazardous material training and ensures HAZMAT processes are followed. • Assists in aircraft movement and flight line FOD prevention walks as required. • Completes maintenance documentation using required forms. • Assists in performing aircraft preflight and basic post-flight inspections. • Operates GSE, flight line vehicles and other support equipment as authorized and required. • Maintain strict compliance with all required Communications Security (COMSEC) policies and procedures

Required Education and Experience:

+ Must have a minimum of eight (8) years recent hands-on avionics maintenance experience and a current FAA A&P Certificate is desired.

+ Completion of a military or civilian aviation avionics technical school or possess an FCC License with endorsements is preferred.

+ Recent work experience on Gulfstream, Global Jet, or business jet avionics maintenance experience is preferred and desired.

+ Experience on maintaining Honeywell Primus systems preferred.

+ Experience in repair and maintenance of radar, communications, nav-aids, lighting and instrumentation.

+ Support repair and maintenance of Mission Support ISR equipment as required.

+ Must have a positive attitude, be a self-starter, work well with others.

+ Must be able to work shifts as assigned and travel as part of a maintenance recovery team as required. CONUS and OCONUS deployment may be required.

+ Must be in good physical condition, and capable of completing/passing a required physical exam and CRC course prior to OCONUS deployment.

+ Must be able to work in the established work/living environment, work shift schedules as assigned 7 days a week, 12 hours a day to support mission requirements

+ Experience in the use of common hand and special tools/testers as required to perform avionics maintenance tasks.

+ Must have in-depth working knowledge of aircraft safety directives.

+ Must be able to read, write, speak and understand English.

+ Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver’s license.

+ Must be able to obtain and maintain an interim DoD secret government security clearance, as a minimum, prior to hire.

+ Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.

+ Must have an in-depth knowledge of using aircraft technical publications—read, interpret, follow and basic comprehension of schematic diagrams, drawings, and charts.

+ Must have a working knowledge (input and extract data) of standard Maintenance Database.

+ Must be willing and able to perform in-flight FCF checks.

Licensing, Certification Requirements:

+ Current FAA Airframe & Powerplant Certificate Desired

+ US Citizenship

+ Valid State Driver’s License

+ Valid US Passport

L3Harris Technologies is proud to be an Affirmative Action/Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

[[extTitle in [[location

Unique Skills:

[[cusuniqSkills

Education and Experience Requirements

High School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required.

Position Purpose:

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.

Job Description

Principle Duties and Responsibilities:

Essential Functions:

+ Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.

+ Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.

+ Ensure that all work accomplished meets quality standards and specifications.

+ Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.

+ Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) .

+ Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.

+ Provide training to less experienced technicians. .

+ Protect customer property (PTP).

Additional Functions:

+ Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. .

+ Implement and apply Lean/continuous improvement processes to all areas of responsibility. .

+ Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. .

+ Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. .

+ Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. .

+ In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .

Perform other duties as assigned.

Other Requirements:

+ Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.

+ Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: [[id

Category: [[customString3

Percentage of Travel: [[custravRequired

Shift: [[cusShift

Employment Type: [[filter2

Posting End Date: [[custextPostEndDate

Equal Opportunity Employer/Veterans/Disabled.

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information (http://www.gulfstream.com/legal\_notice.htm) | Site Utilities (http://www.gulfstream.com/utilities/) | Contacts (http://www.gulfstream.com/contacts/) | Sitemap (http://www.gulfstream.com/sitemap.htm)

Copyright © 2020 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company (http://www.generaldynamics.com/) .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

[[extTitle in [[location

Unique Skills:

[[cusuniqSkills

Education and Experience Requirements

High School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required.

Position Purpose:

Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.

Job Description

Principle Duties and Responsibilities:

Essential Functions:

+ Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time.

+ Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. .

+ Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned.

+ Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications.

+ Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.

+ Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components.

+ Coordinate movement of aircraft as required. .

+ Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. .

+ Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.

Additional Functions:

+ Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. .

+ Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. .

+ Implement and apply Lean/continuous improvement processes to all areas of responsibility. .

+ Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. .

+ In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .

Perform other duties as assigned.

Other Requirements:

+ Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line.

+ Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.).

+ Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.

+ Must be able to read, write, speak, and understand the English language.

Additional Information

Requisition Number: [[id

Category: [[customString3

Percentage of Travel: [[custravRequired

Shift: [[cusShift

Employment Type: [[filter2

Posting End Date: [[custextPostEndDate

Equal Opportunity Employer/Veterans/Disabled.

Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.

Legal Information (http://www.gulfstream.com/legal\_notice.htm) | Site Utilities (http://www.gulfstream.com/utilities/) | Contacts (http://www.gulfstream.com/contacts/) | Sitemap (http://www.gulfstream.com/sitemap.htm)

Copyright © 2020 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company (http://www.generaldynamics.com/) .

Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

The USMC MQ-9 CLS Technician is a highly qualified and skilled aircraft electronics and Ground Control Station technician with experience in troubleshooting multiple electronics systems both aircraft and control stations. Work may be reviewed by supervisor for general compliance with accepted practices. This position may provide technical guidance to lower-level technicians.

**Essential Responsibilities:**

+ Must maintain assigned UAS aircraft electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, and aircraft instruments.

+ Must apply advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers’ manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering changes.

+ Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment.

+ The CLS technician shall utilize excellent organizational skills in prioritizing workload to meet Daily Flight Schedule.

+ Required to make entries in aircraft logs and records, attend shift change maintenance meetings, perform as a QA, and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts.

+ Applies advanced technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.

+ Requires an advanced understanding of the interrelationships of circuits and associated systems.

+ Exercises independent judgment and leadership in performing assigned tasks in conjunction with designated direction from Production Staff and/or Avionic Leads.

+ Uses common and complex test instruments in the performance of assigned duties.

+ Provides technical and directional leadership guidance to lower-level avionic technicians.

+ Provides training to lower-level avionic technicians.

+ Must be able to sign off work in either NALCOMIS/OOMA or IMDS.

+ Must have knowledge and understanding of CNAFINST 4790.2 and DAFI 21-101.

+ Maintains, repairs, and installs various types of electronic equipment and related devices.

+ Applies advanced technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.

+ Must be able to work without direct supervision.

+ Performs all other duties as assigned as requested.

**Minimum Qualifications:**

+ Must have an active Top-Secret US Government clearance. Note: US Citizenship is required to obtain a Top-Secret Clearance.

+ Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.

+ Minimum of five years of actual Ground Control Station (GCS) maintenance experience required.

+ Minimum of two years’ actual experience on MQ-9 GCS, as an Avionics Technician.

+ Must have advanced knowledge of basic and complex electronics maintenance and repair.

+ Must have advanced knowledge of RFF systems, components, and accessories.

+ Must possess advanced knowledge of technical publications related to aircraft electronics maintenance.

+ Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.

+ Must be capable of using and reading blueprints, wiring diagrams, and data tables.

+ Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or before second deployment.

+ Must be able to inspect and operate ground support and auxiliary equipment.

+ Must achieve a passing grade in all required courses/certifications for continued employment, as needed.

+ Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.

+ Must be able to speak, read, write, and understand English.

+ Must submit updated SF-86 within 30 days of hire start date.

+ Must have current/active State Issued Driver’s License.

**Preferred Qualifications:**

+ Must be eligible for Top Secret Clearance with SCI

+ Associate degree in a relevant career field.

+ Current IAT Level II Certification.

+ Prior experience as a Defense Contractor.

+ Avionics Technician experience within the last 10 years.

+ SETTS experience highly desired.

\#MQ-9

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.

Labor Law Posters (https://postings.govdocs.com/#/vxSkbztPuAwwxfs)

EEO including Disability/Protected Veterans

The USMC MQ-9 CLS Technician is a highly qualified and skilled aircraft electronics and Ground Support Station technician with experience in troubleshooting multiple electronics systems both aircraft and control stations. Work may be reviewed by supervisor for general compliance with accepted practices. This position may provide technical guidance to lower-level technicians.

**Essential Responsibilities:**

+ Must maintain assigned UAS aircraft electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, and aircraft instruments.

+ Must apply advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers’ manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering changes.

+ Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment.

+ The CLS technician shall utilize excellent organizational skills in prioritizing workload to meet Daily Flight Schedule.

+ Required to make entries in aircraft logs and records, attend shift change maintenance meetings, perform as a QA, and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts.

**Essential Responsibilities:**

+ Applies advanced technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.

+ Requires an advanced understanding of the interrelationships of circuits and associated systems.

+ Exercises independent judgment and leadership in performing assigned tasks in conjunction with designated direction from Production Staff and/or Avionic Leads.

+ Uses common and complex test instruments in the performance of assigned duties.

+ Provides technical and directional leadership guidance to lower-level avionic technicians.

+ Provides training to lower-level avionic technicians.

+ Must be able to sign off work in either NALCOMIS/OOMA or IMDS.

+ Must have knowledge and understanding of CNAFINST 4790.2 and DAFI 21-101.

+ Maintains, repairs, and installs various types of electronic equipment and related devices.

+ Applies advanced technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.

+ Must be able to work without direct supervision.

+ Performs all other duties as assigned as requested.

**Minimum Qualifications:**

+ Must have an active Top-Secret or Secret US Government clearance. Note: US Citizenship is required to obtain a Clearance.

+ Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.

+ Minimum of five years of actual Aircraft Avionics and Ground Control Station (GCS) maintenance experience required.

+ Minimum of two years’ actual experience on MQ-9 aircraft and GCS, as an Avionics Technician.

+ Must have advanced knowledge of basic and complex electronics maintenance and repair.

+ Must have advanced knowledge of RFF systems, components, and accessories.

+ Must possess advanced knowledge of technical publications related to aircraft electronics maintenance.

+ Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.

+ Must be capable of using and reading blueprints, wiring diagrams, and data tables.

+ Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or before second deployment.

+ Must be able to inspect and operate ground support and auxiliary equipment.

+ Must achieve a passing grade in all required courses/certifications for continued employment, as needed.

+ Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.

+ Must be able to speak, read, write, and understand English.

+ Must submit updated SF-86 within 30 days of hire start date.

+ Must have current/active State Issued Driver’s License.

**Preferred Qualifications:**

+ Must be eligible for Top Secret Clearance with SCI

+ Associate degree in a relevant career field.

+ Current IAT Level II Certification.

+ Deployment Experience.

+ Prior experience as a Defense Contractor.

+ Avionics Technician experience within the last 10 years.

+ SETTS experience highly desired.

\#MQ-9

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.

Labor Law Posters (https://postings.govdocs.com/#/vxSkbztPuAwwxfs)

EEO including Disability/Protected Veterans

The USMC MQ-9 CLS Technician is a highly qualified and skilled aircraft electronics and Ground Control Station technician with experience in troubleshooting multiple electronics systems both aircraft and control stations. Work may be reviewed by supervisor for general compliance with accepted practices. This position may provide technical guidance to lower-level technicians.

**Essential Responsibilities:**

+ Must maintain assigned UAS aircraft electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, and aircraft instruments.

+ Must apply advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers’ manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering changes.

+ Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment.

+ The CLS technician shall utilize excellent organizational skills in prioritizing workload to meet Daily Flight Schedule.

+ Required to make entries in aircraft logs and records, attend shift change maintenance meetings, perform as a QA, and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts.

+ Applies advanced technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.

+ Requires an advanced understanding of the interrelationships of circuits and associated systems.

+ Exercises independent judgment and leadership in performing assigned tasks in conjunction with designated direction from Production Staff and/or Avionic Leads.

+ Uses common and complex test instruments in the performance of assigned duties.

+ Provides technical and directional leadership guidance to lower-level avionic technicians.

+ Provides training to lower-level avionic technicians.

+ Must be able to sign off work in either NALCOMIS/OOMA or IMDS.

+ Must have knowledge and understanding of CNAFINST 4790.2 and DAFI 21-101.

+ Maintains, repairs, and installs various types of electronic equipment and related devices.

+ Applies advanced technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.

+ Must be able to work without direct supervision.

+ Performs all other duties as assigned as requested.

**Minimum Qualifications:**

+ Must have an active Top-Secret US Government clearance. Note: US Citizenship is required to obtain a Top-Secret Clearance.

+ Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.

+ Minimum of five years of actual Ground Control Station (GCS) maintenance experience required.

+ Minimum of two years’ actual experience on MQ-9 GCS, as an Avionics Technician.

+ Must have advanced knowledge of basic and complex electronics maintenance and repair.

+ Must have advanced knowledge of RFF systems, components, and accessories.

+ Must possess advanced knowledge of technical publications related to aircraft electronics maintenance.

+ Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.

+ Must be capable of using and reading blueprints, wiring diagrams, and data tables.

+ Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or before second deployment.

+ Must be able to inspect and operate ground support and auxiliary equipment.

+ Must achieve a passing grade in all required courses/certifications for continued employment, as needed.

+ Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.

+ Must be able to speak, read, write, and understand English.

+ Must submit updated SF-86 within 30 days of hire start date.

+ Must have current/active State Issued Driver’s License.

**Preferred Qualifications:**

+ Must be eligible for Top Secret Clearance with SCI

+ Associate degree in a relevant career field.

+ Current IAT Level II Certification.

+ Prior experience as a Defense Contractor.

+ Avionics Technician experience within the last 10 years.

+ SETTS experience highly desired.

\#MQ-9

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.

Labor Law Posters (https://postings.govdocs.com/#/vxSkbztPuAwwxfs)

EEO including Disability/Protected Veterans

The USMC MQ-9 CLS Technician is a qualified and skilled aircraft electronics and Ground Support Station technician with experience in troubleshooting multiple electronics systems both aircraft and control stations. Work may be reviewed by supervisor for general compliance with accepted practices.

**Essential Responsibilities:**

+ Must maintain assigned UAS aircraft electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, and aircraft instruments.

+ Must apply advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers’ manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering changes.

+ Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment.

+ The CLS technician shall utilize excellent organizational skills in prioritizing workload to meet Daily Flight Schedule.

+ Required to make entries in aircraft logs and records, attend shift change maintenance meetings, perform as a QA, and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts.

+ Applies advanced technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.

+ Requires an advanced understanding of the interrelationships of circuits and associated systems.

+ Exercises independent judgment and leadership in performing assigned tasks in conjunction with designated direction from Production Staff and/or Avionic Leads.

+ Uses common and complex test instruments in the performance of assigned duties.

+ Muat be able to sign off work in either NALCOMIS/OOMA or IMDS.

+ Must have knowledge and understanding of CNAFINST 4790.2 and DAFI 21-101.

+ Maintains, repairs, and installs various types of electronic equipment and related devices.

+ Applies advanced technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.

+ Performs all other duties as assigned as requested.

**Minimum Qualifications:**

+ Must have an active Top-Secret US Government clearance. Note: US Citizenship is required to obtain a Top-Secret Clearance.

+ Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.

+ Minimum of three years of actual Aircraft Avionics and Ground Control Station (GCS) maintenance experience required.

+ Minimum of one year actual experience on MQ-9 aircraft and GCS, as an Avionics Technician.

+ Must have advanced knowledge of basic and complex electronics maintenance and repair.

+ Must have advanced knowledge of RFF systems, components, and accessories.

+ Must possess advanced knowledge of technical publications related to aircraft electronics maintenance.

+ Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.

+ Must be capable of using and reading blueprints, wiring diagrams, and data tables.

+ Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or before second deployment.

+ Must be able to inspect and operate ground support and auxiliary equipment.

+ Must achieve a passing grade in all required courses/certifications for continued employment, as needed.

+ Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.

+ Must be able to speak, read, write, and understand English.

+ Must submit updated SF-86 within 30 days of hire start date.

+ Must have current/active State Issued Driver’s License.

**Preferred Qualifications:**

+ Must be eligible for Top Secret Clearance with SCI

+ Associate degree in a relevant career field.

+ Current IAT Level I Certification.

+ Prior experience as a Defense Contractor.

+ SETTS experience highly desired.

\#MQ-9

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.

Labor Law Posters (https://postings.govdocs.com/#/vxSkbztPuAwwxfs)

EEO including Disability/Protected Veterans

**In partnership with out client, a leading aerospace company. PDS Tech Commercial is looking to fill Aircraft Technician opportunities in Mesa, AZ for an amazing opportunity.**

Job Title: Aircraft Technician II

Location: Mesa, AZ

Pay Rate: $32.19 per hour

This role works under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.

Essential Functions:

+ Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.

+ Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.

+ Ensure that all work accomplished meets quality standards and specifications.

+ Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.

+ Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) .

+ Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.

+ Provide training to less experienced technicians. .

+ Protect customer property (PTP).

Additional Functions:

+ Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered.

+ Implement and apply Lean/continuous improvement processes to all areas of responsibility.

+ Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.

+ Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.

+ Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.

+ In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.

Other Requirements:

+ Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.

+ Must have working knowledge of Turbine Engines. Rolls Royce and Pratt Whitney specific would be a plus!

+ Must be able to read, write, speak, and understand the English language.

+ Live A/C experience required.

Education and Experience Requirements:

+ High School Diploma or GED required.

+ FAA Airframe and Powerplant certificate and Two (2) years of aviation maintenance experience or Four (4) years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.

+ Valid Driver’s License required.

**Pay Details:** $32.19 per hour

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.pdstech.com/candidate-privacy

The Company will consider qualified applicants with arrest and conviction records subject to federal contractor requirements and/or security clearance requirements.

Aircraft Maintenance Technician

United States, Arizona, Phoenix

TechOps

02-May-2024

Ref #: 24713

How you'll help us Keep Climbing (overview & key responsibilities)

The Aircraft Maintenance Technician (AMT) is a critical TechOps role at Delta. In this role, you will maintain the proper and safe functioning of Delta’s fleet, ensuring customers have an exceptional travel experience. AMTs maintain aircraft, aircraft engines, and aircraft components and avionics systems according to Delta and FAA specifications; perform inspections during assembly of parts and after repair or installation of components; document maintenance procedures including component damage, origin, and condition; and practice safety conscious behaviors in all operational processes and procedures.

Summary of responsibilities (not comprehensive of all tasks):

+ Performs all work activities in accordance with established laws, regulations, standards, safety protocols, and procedures to ensure safety of self and others.

+ Inspects aircraft or aircraft components, including landing gear, hydraulic systems, tires, and engines for damage, defects, corrosion, or other wear to ensure airworthiness.

+ Recommends replacement, repair, or modification of aircraft equipment based on inspection.

+ Reports issues, malfunctions, unusual wear, or damage to appropriate personnel, as required.

+ Installs, removes, or modifies aircraft structures, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications.

+ Repairs worn, defective, or damaged parts or components (e.g., damaged gaskets, lines and couplings, cables, and pulleys), using hand tools, gauges, and testing equipment.

+ Inspects completed work to certify that maintenance adheres to standards and procedures, and that aircraft are ready for operation.

+ Interprets discrepancies or logs (written or verbal) to understand history and nature of issue, to troubleshoot issue, and to identify required next steps (e.g., fix, defer, replace).

+ Researches, reads, and interprets technical manuals and guidelines to perform inspections, installations, repairs, or other work activities.

+ Reviews maintenance records to determine if service and maintenance checks, repairs, and overhauls were performed at prescribed intervals.

+ Maintains repair logs, documenting all preventative and corrective aircraft maintenance activities.

+ Serves as a technical expert or mentor by providing advice and corrective recommendations to others.

+ Uses computers, computer systems, and other technology to enter, document, access, receive, or communicate information.

The minimum starting hourly rate for this position is $40.73 with a potential maximum entry rate of $41.32. The ability to reach the maximum hourly rate is dependent upon several other offered premiums (Examples would include but not limited to - Airframe and Powerplant license, Shift differential, Station location differential, Line Maintenance differential, Skill differential).

Benefits and Perks to Help You Keep Climbing

Our culture is rooted in a shared dedication to living our values – Care, Integrity, Resilience, Servant Leadership, and Teamwork – every day, in everything we do. At Delta, our people are our success. At the heart of what we offer is our focus on Sharing Success with Delta employees. Exploring a career at Delta gives you a chance to see the world while earning great compensation and benefits to help you keep climbing along the way:

+ Competitive salary, industry-leading profit sharing program , and performance incentives

+ 401(k) with generous company contributions up to 9%

+ Paid time off including vacation, holidays, paid personal time, maternity and parental leave

+ Comprehensive health benefits including medical, dental, vision, short/long term disability and life benefits

+ Family care assistance through fertility support , surrogacy and adoption assistance , lactation support , subsidized bac k-up care , and programs that help with loved ones in all stages

+ Holistic Wellbeing programs to support physical, emotional, social, and financial health, including access to an employee assistance program offering support for you and anyone in your household, free financial coaching, and extensive resources supporting mental health

+ Domestic and International space-available flight privileges for employees and eligible family members

+ Career development programs to achieve your long-term career goals

+ World-wide p artnerships to engage in community service and innovative goals created to focus on sustainability and reducing our carbon foot prin t

+ Business Resource Groups created to connect employees with common interests to promote inclusi on , provide perspective and help implement strategies

+ Recogn ition r ewards and awards through the platform Unstoppable Together

+ Access to over 500 discounts, specialty savings and voluntary benefits through Deltaperks such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare

What you need to succeed (minimum qualifications)

Must have an FAA Airframe and Power Plant license

Is at least 18 years of age and has authorization to work in the United States. Must have valid driver's license Must pass a DOT required pre-employment drug screen and thereafter submit to DOT mandated random drug and alcohol testing

Must read, write, speak, and understand English

(If transferring internally) Must be performing satisfactorily in present position

Demonstrates that privacy is a priority when handling personal data. Embraces a diverse set of people, thinking and styles. Consistently makes safety and security, of self and others, the priority. Consistently prioritizes safety and security of self, others, and personal data. Embraces diverse people, thinking, and styles.

Possesses a high school diploma, GED, or high school equivalency.

Consistently prioritizes safety and security of self, others, and personal data.

Embraces diverse people, thinking, and styles.

Possesses a high school diploma, GED, or high school equivalency.

+ Consistently prioritizes safety and security of self, others, and personal data.

+ Embraces diverse people, thinking, and styles.

+ Possesses a high school diploma, GED, or high school equivalency.

+ Is at least 18 years of age and has authorization to work in the United States.

What will give you a competitive edge (preferred qualifications)

+ One year of full-time work experience

+ Prior military experience

+ Prior work experience in the airline industry

+ Status as a current Delta employee

+ One year of mechanical experience (outside of educational experience)

+ One year of aircraft maintenance experience (outside of educational experience)

+ One year of heavy jet maintenance experience (outside of educational experience)

+ Prior electronics/avionics experience or FCC license

Delta Air Lines, Inc. is an Equal Employment Opportunity / Affirmative Action employer and provides reasonable accommodation in its application process for qualified individuals with disabilities and disabled veterans. If you are a qualified individual, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings through this site, apply for jobs through Delta’s online system, or at any point in the selection process. To request a reasonable accommodation, please click here